Categories
Pages
Dutch German English French
Your shopping cart is empty.
Menu
 
    Dutch German English French
Balboa ozonator
Balboa ozonator
0 Review | Add review
Deze dient eens in de twee a drie jaar vervangen te worden.
€ 145,00
Price per stuk
Quantity: 
Order
 

Do you have a question about this product?

Ask us your question

Whatsapp
Ozone Generator
Make and Model: Balboa Corona Discharge with replaceable chip
Power: Volts: 230
Hz: 50
How it works: This Ozone activates, usually during a pre-programmed filter cycle, some Hot Tubs have a 24hr circulation and Ozone mode. We recommend that your Ozone should run for between 6 and 8 hours a day. The unit does not blow air, air is drawn through the Ozone on a venturi system. Usually you will find a designated water jet plumbed in to the shell of the Hot Tub somewhere near the centre or sometimes a drain. Water will pass through the jet sucking in air through the Ozone injector which will be connected to the Ozone. During a filter cycle the Ozone unit will be powered up, the Corona Discharge mechanism will kick in and charge the oxygen with Ozone which enters the tub and in turn helps to kill bacteria with the aid of the sanitisers in the water.
Compatible with: This unit can be fitted to virtually any Hot Tub with a venturi system. This unit replaces the older style UV cylinder style unit, this latest version also replaces the previous version where you were not able to replace the chip. Can be used with Spaform, Aegean, Leisurerite, Leisure Bay, Hotspring, Sundance, Marquis, Master Spa, Signature, Southwest Spas, Hydrospa, Hydropool, QCA, Sunset, Sunrise, Sunbelt, Beechcoomber, LA Spas, Dimension 1, Saratoga, Emerald Spa, Sapphire Spas and more...
Connections / Fixings: Usually screws to an upright up as high as it can go. We advise that there should be a double air loop with a one way valve (included) to stop water passing back through. The Ozone pipe is clear and can usually insert into a 3/8 inch air pipe connected to your venturi system, this will push fit on to the Ozone unit. The unit comes with an AMP cord but it can be replaced with your existing wire on site quite easily if needed.
Dimensions: Length: 160mm
Width: 130mm
Depth: 70mm
Additional notes: If you do not have any ozone bubbles floating up in your tub when the circulation pump is running you will need to contact us or so we can advise of a few things to check, or you may need an engineer to visit.

It comes with a replaceable chip so that you don't have to buy a whole new unit when it reaches the end of it's life. Life span is generally 2-3 years depending on use

Order by:

Add review

No reviews found.

Ask a question about this product

Fields marked with a * are mandatory

Your question has been sent! Thank you.

We will provide you with an answer as soon as possible.